artemis Shop/Cable and cable sets products

Focus Power Cable C-Motion (RRS-9) 178,50 €

Focus power cable 12V for CAMIN from artemis / 3pin Fischer → 4pin Lemo / length 0,8 m - 2.6 feet (C019-K39) / Cable RRS-9.
For all artemis camera stabilizer systems and GPI system.

Cam Power / 24V ARRI 166,60 €

Camera power cable for all 24V ARRI cameras, like 535, 535, 235, 416, ARRI SR III & SR II. To be used with Cine HD, Cine, EFP Pro HD SDI incl. 24V Upgrade.

Cam Power / 12V XLR 136,85 €

Power cable for video and film cameras, which are equipped with a standard XLR power in socket and asking for 12V power supply. Made for the use with: Cine HD, Cine, EFP Pro HD SDI, EFP HD SE, EFP.

Triax Adapter Cable / D&H 1.392,30 €

Special triax adapter cable / Damar & Hagen - � 4 mm - length 2.5 m (8.2 ft)

Triax Adapter Cable / Fischer 1.118,60 €

Special triax adapter cable / Fischer / � 4 mm - length 2.5 m (8.2 ft)

Triax Adapter Cable / Lemo 1.118,60 €

Special triax adapter cable / Lemo / � 4 mm - length 2.5 m (8.2 ft)

ARRI Alexa HiCap Cam Power 12V EFP HD 208,25 €

12V HiCap (high capacity) camera power cable for the

ARRI Alexa to run the Alexa with 12V using the 2pin Fischer plug.

The cable provides a wider cable diameter for extreme low voltage drop.

Works only with the artemis Cine HD Pro!

ARRI Alexa HiCap Cam Power 12V Cine HD Pro 196,35 €

12V HiCap (high capacity) camera power cable for the

ARRI Alexa to run the Alexa with 12V using the 2pin Fischer plug.

The cable provides a wider cable diameter for extreme low voltage drop.

Works only with the artemis Cine HD Pro!

Focus Power Cable open-end 130,90 €

Power cable 12V with a open end to be used at the Fucus Power Out socket.
For all artemis camera stabilizer systems and GPI system.

Tally Kit / Extern / artemis ACT2 464,10 €

This Tally kit is made for Cine HD Pro and the artemis EFP and the artemis EFP HD SE.

It contains everything you need to use a Tally with your artemis.

12V XLR / HiCap Cam Power / EFP HD 196,35 €

12V HiCap (High Capacity) camera power cable for 12V cameras powered with 4 pin XLR. The cable provides a wider cable diameter for extrem low voltage drop. Works only with the artemis EFP HD.

Focus Power 12V / Bartech 142,80 €

Power cable to supply the Bartech focus remote receivers - 12V. For all artemis camera stabilizer systems and GPI system.

ETS Power / GPI Pro 160,65 €

Power cable 12V for the external Tally system, to be used with GPI, George Paddock systems. The cable will be connected at the second camera power socket.

ETS Power / Open End 130,90 €

Power cable 12V for the external Tally system, with an open end. This allows you to do you own power cable, or to use the Tally system even on a crane or other

Aux Power / Open End 130,90 €

Aux Power cable open end allows to create your self a cable to connect small 12V units like sound devices to the side to side or to the lower sled. Max 2.5 Amp Made for Cine HD, Cine, EFP Pro HD SDI, EFP HD SE, EFP.

Video Power / Open End 113,05 €

The Video Power cable open end allows to create your self a cable to connect a 12V video transmitter to the side to side or to the lower sled. The cable provides the SD video signal and 12V max 2.5 Amp. Made for Cine HD, Cine, EFP

Recorder Cable Lemo 142,80 €

Cable to connect a recorder to the Cine HD and Cine. Provides 12V, video in and video out. So beside record also playback can be handeld with this cable. Connets on the recorder side have to be specified and announced before order.

Cable for Digital Level Universal 232,05 €

Special adapter cable to connect the XCS digital level to any SD monitor which is using BNC for SD video in and a 4 pin XLR for 12V power in. This cable will work with all systems which have a 8 pin Lemo video out. Like artemis Cine HD, Cine and EFP. It will also work with GPI George Paddock and any system which is using the 8 pin output

12V Pwr Cable / Camera & Monitor 113,05 €

12V power cable for EFP Pro HD SDI and EFP HD SE, to power up monitors with 12V / 4 pin XLR socket.
Or to be used as camera power cable with the artemis DV Pro MD and FX

SD Monitor Cable / Lemo 8pin 178,50 €

SD monitor cable for use of SD monitors with the Cine HD, Cine and EFP. This cable is made for monitors with a 8 pin LEMO video in socket. To be used with monitors like the TB6 green monitor or the Transvideo CineMonitor HD 6“ SBL and 8" SBL.