System EFP HD 0,00 €

The artemis EFP HD is made to support today‘s digital cinematography and the work with the
RED One and actual HD cameras, in the most professional way ever.
The EFP HD offers a 12V high capacity power wiring inside the rig, which enables capacities for the camera up to 15 Amp.
For the RED One camera, the side to side offers a special camera power out, using the same Lemo 2B 6 pin socket and plug as the RED One.
Because of the HiCap wiring, the EFP HS got lowest voltage drop ever.
The build in Hot Swap technology by Anton Bauer helps to avoid rebooting the RED One, if the batteries are low.
The rig also offers, camera based battery capacity control, when RED batteries are used with a RED camera.
SD and HD SDI video processing up to 4.5 GHz and as all artemis systems , also this system, got a gimbal with tool-free clamp and a lower sled which allows free positioning of the battery mounts and using „dual dynamic balance“. It does not matter what kind camera is used, it will be balanced perfect.

Modular Design:
Because of the artemis modular design, is is possible to combine the top stage and the lower sled of the EFP HD with the 1.5“ Post and Gimbal, or with the new 1.8“ ACT2 Post and the 1.8“ ACT2 Gimbal.

Video:
The artemis EFP HD top stage handles HD SDI up to 4.5 GHz and SD video signals

Hot Swap:
Since 2009 the Hot-Swap Technology, is a standard feature of the artemis EFP HD systems.
Thus, during a battery change electrical power is supplied continuously and there is no need to shut down the camera, monitor and radio channels.

HiCap:
Because of the HiCap wiring the artemis EFP HD can provide more than 200 watt for the camera. It is, therefore, also capable to supply modern HD digital cameras with optimal power. The HiCap wiring is great for 3D productions too.

Tally:
The EFP HD is prepared for the use of the new ACT2 Tall system
(code S26003-1820), that can be used with all camera types.
So artemis systems are easy to integrate into studio and OB van routines.

Detachable Modules:
With the quick-release mechanism, which also functions as docking ring, you can easily remove or detach the side-to-side and the sled module from the post. With this feature, you can simply flip the gimbal over for low-mode operations in no time and you can use a super post. And you can easily upgrade your systems with new modules later. The modular design makes service quick and simple: We provide you with a replacement module while we service your module in our workshop. So you don’t have any downtime.

The EFP HD system includes:
8“ camera dovetail plate, hex keys and the post tool

Note:
The displayed Monitor Bracket is not a part of the system, the monitor bracket have to be ordered separately.
Also the docking bracket have to be ordered separately.
Monitor and batteries are NOT included!

System Cine HD Pro 0,00 €

The new artemis Cine HD Pro is a completely revised system, which combines the traditional functions of the previous Cine and Cine HD systems with the modern equipment of the artemis EFP HD Special Edition. The modular concept of the artemis systems was expanded by a new 1.8" post and a new 1.8" gimbal.
You can also combine the Cine HD Pro modules, with the redesigned 1.5“ Post and 1.5“ Gimbal.

Video:
The new artemis Cine HD Pro top stage now featuring “Dual Video Processing”, which allows simultaneously use of HD SDI and SD video signals.

Hot Swap:
2009 for the first time, the Hot-Swap Technology, a feature that only artemis EFP HD systems have, is used now in the Cine HD Pro product range too.
Thus, during a battery change electrical power is supplied continuously and there is no need to shut down the camera, monitor and radio channels.

HiCap:
Because of the HiCap wiring the artemis Cine HD Pro, which was first used in artemis EFP HD 2009, the Cine HD Pro can provide more than 200 watt for the camera. It is, therefore, also capable to supply modern HD digital cameras with optimal power. The HiCap wiring it is great for 3D productions too.

The HiCap wiring not only keeps the power loss extremely low (voltage drop) but, in combination with the Hot-Swap technology, also allows for a longer operating time of the battery. Thus, depending on the type of battery used, the operating time can be doubled.

Tally:
The Cine HD Pro is prepared for the use of the new ACT2 Tall system
(code S26003-1820), that can be used with all camera types.
So artemis systems are easy to integrate into studio and OB van routines.

Modular design:
With the quick-release mechanism, which also functions as docking ring, you can easily remove or detach the side-to-side and the sled module from the post. With this feature, you can simply flip the gimbal over for low-mode operations in no time and you can use a super post. And you can easily upgrade your systems with new modules later. The modular design makes service quick and simple: We provide you with a replacement module while we service your module in our workshop. So you don’t have any downtime.

Separated power circuits:
The internal wiring of the systems has separated circuits for the camera and its consumers as well as for the monitor and its consumers. This decreases signal noise and supports to monitor power consumption of the single components.

Since 2001 the Cine HD system is the right choice for all professional film and HD movie cinematography applications. Because this was the first camera stabilizer system offering HD capacity.
Both the artemis Cine HD Pro and the EFP HD feature fully modular set-ups that give users the flexibility they need to operate a variety of film and video cameras and accessories with ease.

The Cine HD Pro provides 12V / 24V, SD, HD SDI, recorder in/out, video-power out, and the build in Tally-function supports easy integration in any kind of production.

You having the free choice if you want combine the Cine HD Pro modules with the new 1.8“ ACT2 Post and the new 1.8“ ACT2 Gimbal or with the redesigned 1.5“ Post and 1.5“ Gimbal.

The system will come with the 8“ camera dovetail plate, post tool and hex keys.

Note:

The displayed Monitor Bracket is not a part of the system, the monitor bracket have to be ordered separately.
Also the docking bracket have to be ordered separately.
Monitor and batteries are NOT included!

artemis Shop/Camera Stabilizer Systems products

System EFP HD 0,00 €

System Cine HD Pro 0,00 €