artemis Shop/Tally systems products

Tally Kit / Extern / artemis ACT2 464,10 €

This Tally kit is made for Cine HD Pro and the artemis EFP and the artemis EFP HD SE.

It contains everything you need to use a Tally with your artemis.

Lower Tally Red Light 142,80 €

The Lower Tally Red light is a part of the artemis Tally sets. The compact black housing contains 5 extra bright red LEDs. The lower Tally Red light is made to be mounted on the monitor, to inform the operator if the camera is rolling or if he is „on Air“ while live shooting.

Tally Sensor Cable 113,05 €

Tally sensor to be used with the internal Tally system of the Cine HD, Cine and EFP Pro HD SDI. Also needed for the new artemis ACT2 Tally system for the Cine HD Pro, EFP HD SE and EFP.

This Tally sensor cable is also used with the external Tally system for GPI and Steadicam.

Upper Tally Red Light 190,40 €

The Upper Tally Red light belongs to the Tally kit made for the Cine HD, Cine and EFP Pro HD SDI. The compact black housing contains 5 extra bright red LEDs. The Upper Tally Red light is made to be mounted on the 15 mm diameter rods below the lens. In this position the Tally light is close to the lens and easy to be seen be the host of the show.

External Tally System (ETS) 416,50 €

This Tally kit is made for the use with Externes Tally System for Steadicam™, GPI, XCS and other systems.

The ETS Tally electronic is build into the upper Tally light housing.

The Tally housing can be clamped onto the 15mm rods directly under the lens.

An external cable will bring the Tally-signal to the lower red light which is mounted on the monitor. This kit contains upper red light, the monitor red light and the Tally-sensor cable.

NOTE: A working system requires to order also 6914, 6891 and the right power cable for the the rig you are using.

Lower Tally Red Light / ETS 178,50 €

The Lower Tally Red light is a part of the external Tally / ETS.
It can be used with any Steadicam™, GPI, XCS or any other system.

The compact black housing contains 5 extra bright red LEDs.
The lower Tally Red light is made to be mounted on the monitor, to inform the operator if the camera is rolling or if he is „on Air“ while live shooting.
Please inform us about the cable length you need.