artemis Shop/Vests products

Weste DV Pro FX 952,00 €

The DV Pro FX is a back mounted vest, which means that the spring arm is mounted at the back of the vest, so that all stiff parts are at the back of the vest. The weight of the camera stabilizing system is distributed from the back to the hips and shoulders; about 80 per cent of the weight is on the hips and 20 per cent on the shoulders. This is particularly interesting for beginners, not only because a back mounted vest puts hardly any strain on the operator’s back, but also because you can open the vest at the front to breathe unrestrictedly. The open front design enables the operator to shoot longer takes without unnecessary strain on the back and prevents the operator from getting tired too early. Since the artemis DV Pro vest does not have any hard or stiff parts in the front, it is particularly well suited for women. You can position all Cordura parts and well-ventilated pads flexibly and adjust them perfectly to your individual needs. Height and width of the arm support that receives the arm are fully adjustable and you can, of course, mount the arm on your favorite side. With the DV Pro FX arm-vest connector, you can adjust the angle between vest and arm in the same way as you can do it with the professional versions of the larger artemis models.
Due to its flexibility and compatibility the artemis vest satisfies all requirements and demands of professional operators.

• Back mounted vest
• Ergonomically designed (gentle to the back)
• High-quality materials such as Cordura guarantee extremely comfortable fit.
• 80 percent of the weight is distributed on the hip.
• Breathing is not restricted.
• Optimized fit for women
• Height and width of the vest fully adjustable
• Reversible arm-support is fully height and weight adjustable
• DV Pro FX arm vest connector
• Clamping and angle adjustment of the arm with lever and wing screws
• All adjustments of the vest are performed with a 4 mm / 5/32” hex key
• All Pads and Cordura parts are remove and washable
• Reinforced aluminum alloy
• Matte black surface
• Made in Germany

Weste DV Pro MD 1.130,50 €

The DV Pro MD is a back mounted vest, which means that the spring arm is mounted at the back of the vest, so that all stiff parts are at the back of the vest. The weight of the camera stabilizing system is distributed from the back to the hips and shoulders; about 80 per cent of the weight is on the hips and 20 per cent on the shoulders. This is particularly interesting for beginners, not only because a back mounted vest puts hardly any strain on the operator’s back, but also because you can open the vest at the front to breathe unrestrictedly. The open front design enables the operator to shoot longer takes without unnecessary strain on the back and prevents the operator from getting tired too early. Since the artemis DV Pro vest does not have any hard or stiff parts in the front, it is particularly well suited for women. You can position all Cordura parts and well-ventilated pads flexibly and adjust them perfectly to your individual needs. Height and width of the arm support that receives the arm are fully adjustable and you can, of course, mount the arm on your favorite side. With the DV Pro FX arm-vest connector, you can adjust the angle between vest and arm in the same way as you can do it with the professional versions of the larger artemis models.
Due to its flexibility and compatibility the artemis vest satisfies all requirements and demands of professional operators.

Back mounted vest
• Ergonomically designed (gentle to the back)
• High-quality materials such as Cordura guarantee extremely comfortable fit.
• 80 percent of the weight is distributed on the hip.
• Breathing is not restricted.
• Optimized fit for women
• Height and width of the vest fully adjustable
• Reversible arm-support is fully height and weight adjustable
• DV Pro MD arm vest connector
• Clamping and angle adjustment of the arm with lever and wing screws
• All adjustments of the vest are performed with a 4 mm / 5/32” hex key
• All Pads and Cordura parts are remove and washable
• Reinforced aluminum alloy
• Matte black surface
• Made in Germany

Vest ACT2 3.927,00 €

More flexibility and comfort for the operators

During development of the artemis ACT2 vest, perfect fit and great comfort were in the center of our attention:
The vest has seven segments that can be freely positioned in height and width, so that operators can adjust the shoulder, chest and hip segments perfectly to their individual physique.
The perfect fit of this vest allows longer operating times.
The operator will not get exhausted too early, and the vest prevents unhealthy postures that may cause pains when maintained too long.
The ACT2 vest fits all operators, regardless of their individual body height and girth. On the basis of advanced materials, the padding could be separated into six single pads.
These pads are not made from plastic foam as usual, but from a newly developed extremely breathable material. Due to this combination of form and material more air can circulate through the pads and the spaces between them; this feature reduces sweating during operating significantly. All textile parts of the vest can easily be removed and washed.

The new locking mechanism for the chest and hip sections enables fast adjustment and easy fastening of the chest and hip belts.
With only one hand the operator can open the quick-release locking mechanism during short breaks, for easy relaxing and breathing space. After fastening the quick-release locking mechanism the belts will return exactly to their former position.

Adjusting the length of the chest telescope and position of the chest bridge, can be done without any tool.
The tool-free clamp levers can be used with only one hand.
The artemis ACT2 vest is equipped with the american standard industry vest-arm connector (mating block) and therefore fully compatible to systems and spring arms of other manufacturers.

Innovative materials and the clever construction of the ACT2 vest make the everyday life of operators much easier. Last but not least, its extreme flexibility is an interesting feature for rental houses and television stations where several operators might have to share one vest.

Features:

Ergonomic and flexible design
Perfect adjustable to any operators height
Every segment of the vest can be placed at the right position, following the shape of the operator
Improved pad material offers more comfort
New pad technology distributes the payload all over the upper part of the
operators body and avoids particularly spots of pressure
The new pad layout increases ventilation and helps to cool down the operator
All pads are easily removable and can be washed
Fast locking mechanism for the hip and chest
Tool-free adjustment for the chest telescope and the chest bridge
American standard industry connector (mating block

The flexible vest concept is the right choice for operators looking for a spine friendly perfect fitting and comfortable vest. With easy to clean pads, small transportation dimension and a modern design, the ACT2 vest is a state of the art product.